Peelers

Food Preparation, Peelers, Electrolux   (+ 3% Electrolux Surcharge) 601360
Electrolux (+ 3% Electrolux Surcharge) 601360

Can be placed on a worktop. 5 kg, removable stainless steel peeling chamber contains the abrasive plate which also serves as a container for carrying the vegetables. Vegetables can be loaded directly into the peeling chamber, away from the machine. Easily assembled onto the base, with the drive shaft fitting into the centre of the plate. The transparent cover closes the cylinder during the peeling operations. Timer pre-set to 3 minutes. Peeling speed: 305 rpm. Removable water inlet, on the cover, designed to serve as a spray for cleaning the machine. The electronic controls and the motor of the peeler have IP55 protection. Optional drying basket.
Supplied with abrasive plate and integrated/removable filter basket. UK plug.


view more button
Food Preparation, Peelers, Electrolux   (+ 3% Electrolux Surcharge) 601540 PEELER
Electrolux (+ 3% Electrolux Surcharge) 601540 PEELER

Can be placed on a worktop. 8 kg, removable stainless steel peeling chamber contains the abrasive plate which also serves as a container for carrying the vegetables. Vegetables can be loaded directly into the peeling chamber, away from the machine. Easily assembled onto the base, with the drive shaft fitting into the centre of the plate. The transparent cover closes the cylinder during the peeling operations. Timer pre-set to 3 minutes. Peeling speed: 305 rpm. Removable water inlet, on the cover, designed to serve as a spray for cleaning the machine. The electronic controls and the motor of the peeler have IP55 protection. Optional drying basket.
Supplied with abrasive plate, abrasive cylinder and integrated/removable filter basket. UK plug.


view more button
Food Preparation, Peelers, Electrolux   (+ 3% Electrolux Surcharge) 601792 10KG 1 PHASE
Electrolux (+ 3% Electrolux Surcharge) 601792 10KG 1 PHASE

Constructed in stainless steel with a transparent lid in special high resistant plastic. The removable rotating plate is covered with a special abrasive vitreous (lavastone) material guaranteeing a high quality finish to the peeled vegetables and a practically unlimited lifespan (knife plate available upon request). Flat and waterproof (IP55) control panel with programmable timer and low voltage level. An interlocking safety magnetic devices will stop the machine from operating when the lid or unloading door is opened. Removable water jet device is fitted as standard to facilitate cleaning. Supplied with abrasive plate


view more button
Food Preparation, Peelers, Electrolux   (+ 3% Electrolux Surcharge) 602010
Electrolux (+ 3% Electrolux Surcharge) 602010

Constructed in stainless steel. The removable rotating plate and the cylinder are covered with a special abrasive vitreous (lavastone) material guaranteeing a high quality finish to the peeled vegetables and a practically unlimited lifespan. Fully opening polycarbonate lid. An interlocking safety magnetic device will stop the machine when the unloading door is opened. Flat and waterproof touch button control panel with timer. The electronic controls and motor have IP55 protection.
Supplied with abrasive plate and abrasive cylinder for hard vegetables peeling.


view more button
Food Preparation, Peelers, IMC F58/900 Single Phase
IMC F58/900 Single Phase


view more button
Food Preparation, Peelers, IMC F58/901 SP12 - 3 phase
IMC F58/901 SP12 - 3 phase

Handling up to 12kg of potatoes per load, the SP12 Peeler is a cost effective solution for smaller operations. The carborundum liner acts as a fill guide and the SP12 also features a robust stainless steel lid with secure push fit.

Dimensions:
1120x530x624mm low pedestal
1400x530x624mm high pedestal.
Output: 120kg per hour


view more button
Food Preparation, Peelers, IMC F58/902 SP12 - single phase
IMC F58/902 SP12 - single phase

Handling up to 12kg of potatoes per load, the SP12 peeler is a cost effective solution for smaller operations. The carborundum liner acts as a fill guide and the SP12 also features a robust stainless steel lid with secure push fit.Available in a high pedestal and low pedestal model.


view more button
Food Preparation, Peelers, IMC F58/903 SP12H - 3 phase
IMC F58/903 SP12H - 3 phase

Handling up to 12kg of potatoes per load, the SP12 Peeler is a cost effective solution for smaller operations. The carborundum liner acts as a fill guide and the SP12 also features a robust stainless steel lid with secure push fit.

Dimensions:
1120x530x624mm low pedestal
1400x530x624mm high pedestal.
Output: 120kg per hour


view more button
Food Preparation, Peelers, IMC F58/910 SP25 - single phase
IMC F58/910 SP25 - single phase

Handling up to 25kg of potatoes per load, the SP25 peeler is ideal for larger and busier operations. High grade stainless steel and cast alloy construction ensure durability, combining strength with ease of use and cleaning. Available in a high pedestal model and low pedestal model.


view more button
Food Preparation, Peelers, IMC F58/911 SP25 - 3 phase
IMC F58/911 SP25 - 3 phase

Handling up to 25kg of potatoes per load, the SP25 Peeler is ideal for larger and busier operations. High grade stainless steel and cast alloy construction ensure durability, combining strength with ease of use and cleaning.

Dimensions:
1080x564x725mm low pedestal,
1360x564x725mm high pedestal.
Output: 250kg per hour


view more button
Food Preparation, Peelers, IMC F58/912 SP25H - single phase
IMC F58/912 SP25H - single phase

Handling up to 25kg of potatoes per load, the SP25 Peeler is ideal for larger and busier operations. High grade stainless steel and cast alloy construction ensure durability, combining strength with ease of use and cleaning.

Dimensions:
1080x564x725mm low pedestal,
1360x564x725mm high pedestal.
Output: 250kg per hour


view more button
Food Preparation, Peelers, IMC F58/913 SP25H - 3 phase
IMC F58/913 SP25H - 3 phase

Handling up to 25kg of potatoes per load, the SP25 Peeler is ideal for larger and busier operations. High grade stainless steel and cast alloy construction ensure durability, combining strength with ease of use and cleaning.

Dimensions:
1080x564x725mm low pedestal,
1360x564x725mm high pedestal.
Output: 250kg per hour


view more button
Food Preparation, Peelers, IMC F59/510 MF10 - single phase
IMC F59/510 MF10 - single phase

Handling up to 10kg per load, the MF10 unlined version gives 100kg output per hour. A non-lined onion peeling version is also available.

Dimensions: 1130x481x592mm
Output: 100kg per hour


view more button
Food Preparation, Peelers, IMC F59/511 MF10 - 3 phase
IMC F59/511 MF10 - 3 phase

Handling up to 10kg per load, the MF10 unlined version gives 100kg output per hour. A non-lined onion peeling version is also available.


view more button
Food Preparation, Peelers, IMC F59/520 MF15 - single phase
IMC F59/520 MF15 - single phase

MF15

Handling up to 15kg per load, the MF15 unlined version gives 150kg output per hour. A non-lined onion peeling version is also available.

Dimensions: 1195x481x592mm
Output: 150kg per hour

Special Features

Available with interchangeable peeling plate for multi-functional use, or with peeling plate and cylinder liner for faster peeling.

WRAS approved class A airbreak
Easily adjustable integral timer
Tough polycarbonate inspection window
Designed for easy maintenance
Positive latch lid
Quick and easy to clean
Space-saving, multi-functional compact design.


view more button
Food Preparation, Peelers, IMC F59/521 MF15 - 3 phase
IMC F59/521 MF15 - 3 phase

Handling up to 15kg per load, the MF15 unlined version gives 150kg output per hour. A non-lined onion peeling version is also available.


view more button
Food Preparation, Peelers, IMC F59/730 MF15 with Onion plate- single phase
IMC F59/730 MF15 with Onion plate- single phase

MF15

Handling up to 15kg per load, the MF15 unlined version gives 150kg output per hour. A non-lined onion peeling version is also available.

Dimensions: 1195x481x592mm
Output: 150kg per hour


view more button
Food Preparation, Peelers, IMC F72/200 VQ3.5 - 1 phase
IMC F72/200 VQ3.5 - 1 phase

Compact design,small footprint,quiet running motor,simple controls. For the small to medium size kitchen.3.5kg capacity,available in single and three phase


view more button
Food Preparation, Peelers, IMC F72/210 VQ7 - 1 phase
IMC F72/210 VQ7 - 1 phase

The IMC VQ7 Potato Peeler is ideal for smaller kitchens with its small footprint and quiet operation. Stainless steel and cast aluminium construction.Easy to install and clean.Easy to use manual controls.Suits small to medium sized kitchens.Heavy duty belt and pulley drive.Capacity 7kg.Output 50kg per hour

Also available in 3 phase as code F72/211


view more button
Food Preparation, Peelers, IMC MF5 F59/500 POTATO PEELER
IMC MF5 F59/500 POTATO PEELER

PLATES CAN BE ADDED TO THIS UNIT TO MAKE MULTI FUNCTIONAL.


view more button
Food Preparation, Peelers, Metcalfe 56SS
Metcalfe 56SS


view more button
Food Preparation, Peelers, Metcalfe Peelers & Chippers 10lb Bench Model Hammer Grey - EP10 (5P101)
Metcalfe Peelers & Chippers 10lb Bench Model Hammer Grey - EP10 (5P101)

The bench model potato peeling machine is available in 4.5Kg. (10lb) and 6.8Kg. (15lb) capacity. The peelers are constructed from non-corrosive aluminium alloy castings, with the spindle housing and chute cast integrally, eliminating joints and possible leakage. The bench models may be mounted on our tubular pedestals, sink sides or on our mobile trolley. The peelers comply with all relevant safety
standards, and are designed for ease of maintenance and cleaning.


view more button
Food Preparation, Peelers, Metcalfe Peelers & Chippers 10lb Bench Model Natural Aluminum NA10 (5P103)
Metcalfe Peelers & Chippers 10lb Bench Model Natural Aluminum NA10 (5P103)

The Metcalfe 10lb (4.5kg) and 15lb (6.8kg) potato peeling machines are constructed from food grade, non-corrosive aluminium alloy castings, with the spindle housing and chute cast integrally, eliminating joints and possible leakage.

Available in grey hammer paint finish or in a natural aluminium, these peelers can be sinktop, pedestal or trolley mounted.

The peelers comply with all relevant safety standards, and are designed for ease of maintenance and cleaning.

Metcalfe offer a comprehensive warranty and a responsive after sales service, catering for your every need.


view more button
Food Preparation, Peelers, Metcalfe Peelers & Chippers 15lb Bench Model Hammer Grey - EP15 (5P151)
Metcalfe Peelers & Chippers 15lb Bench Model Hammer Grey - EP15 (5P151)

Hammer Grey Painted Finish
The Metcalfe 15lb (6.8kg) potato peeling machine is constructed from food grade, non-corrosive aluminium alloy castings, with the spindle housing and chute cast integrally, eliminating joints and possible leakage.The peelers comply with all relevant safety standards, and are designed for ease of maintenance and cleaning.


view more button
Food Preparation, Peelers, Metcalfe Peelers & Chippers GU4- 14LB High Pedestal Peeler 3 phase (5P148)
Metcalfe Peelers & Chippers GU4- 14LB High Pedestal Peeler 3 phase (5P148)

• Powerful direct gear drive motors. The 28lb (12.6kg) peelers have 0.5hp geared units

• 3 phase

• Designed to enable the user to operate, clean and maintain with the minimum of effort

• Designers and patent holders of the guarded discharge chute. Fully compliant with the requirements of the Health and Safety at Work Act, 1974. It protects the operator by allowing the door to the chamber to be opened which stops hand access through the door aperture whilst the machine is working

• Motor and gearbox units are housed inside the pedestal therefore no external projections

• The drive between the output shaft of the unit and the drive shaft of the peeler is by means of a flexible coupling which will prevent damage to the motor or gearbox if the machine is accidentally jammed or overloaded

• Top casting removable without tools so that the rotor plate can be lifted out. Turn on water and the whole machine is flushed clean . Cleaning should be carried out on a daily basis

• Rotor plate bonded with abrasive grit. Inside wall of peeling chamber has patented cast-in abrasive serrations which dispenses with the need for abrasive coating. Consequently there is less potato loss during both peeling and boiling and the efficiency of the serrations will last the life of the machine


view more button
Food Preparation, Peelers, Metcalfe Peelers & Chippers GU4- 14lb high pedestal single phase - sink height (5P147)
Metcalfe Peelers & Chippers GU4- 14lb high pedestal single phase - sink height (5P147)


view more button
Food Preparation, Peelers, Metcalfe Peelers & Chippers GU4- 14lb Low Pedestal - 3 phase (5P146)
Metcalfe Peelers & Chippers GU4- 14lb Low Pedestal - 3 phase (5P146)

14lb low pedestal potato peeler, 3 phase. Powerful direct gear drive motors. The 14lb (6.3kg) peelers have 0.5hp geared units

• Designed to enable the user to operate, clean and maintain with the minimum of effort

• Designers and patent holders of the guarded discharge chute. Fully compliant with the requirements of the Health and Safety at Work Act, 1974. It protects the operator by allowing the door to the chamber to be opened which stops hand access through the door aperture whilst the machine is working

• Motor and gearbox units are housed inside the pedestal therefore no external projections


view more button
Food Preparation, Peelers, Metcalfe Peelers & Chippers GU4- 14lb Low Pedestal - single phase (5P145)
Metcalfe Peelers & Chippers GU4- 14lb Low Pedestal - single phase (5P145)

14lb low pedestal potato peeler, single phase. Powerful direct gear drive motors. The 14lb (6.3kg) peelers have 0.5hp geared units

• Designed to enable the user to operate, clean and maintain with the minimum of effort

• Designers and patent holders of the guarded discharge chute. Fully compliant with the requirements of the Health and Safety at Work Act, 1974. It protects the operator by allowing the door to the chamber to be opened which stops hand access through the door aperture whilst the machine is working

• Motor and gearbox units are housed inside the pedestal therefore no external projections


view more button
Food Preparation, Peelers, Metcalfe Peelers & Chippers GU8- 28lb high pedestal 3 phase - sink height (5P288)
Metcalfe Peelers & Chippers GU8- 28lb high pedestal 3 phase - sink height (5P288)

• Powerful direct gear drive motors. The 28lb (12.6kg) peelers have 0.5hp geared units

• 3 phase

• Designed to enable the user to operate, clean and maintain with the minimum of effort

• Designers and patent holders of the guarded discharge chute. Fully compliant with the requirements of the Health and Safety at Work Act, 1974. It protects the operator by allowing the door to the chamber to be opened which stops hand access through the door aperture whilst the machine is working

• Motor and gearbox units are housed inside the pedestal therefore no external projections

• The drive between the output shaft of the unit and the drive shaft of the peeler is by means of a flexible coupling which will prevent damage to the motor or gearbox if the machine is accidentally jammed or overloaded

• Top casting removable without tools so that the rotor plate can be lifted out. Turn on water and the whole machine is flushed clean . Cleaning should be carried out on a daily basis

• Rotor plate bonded with abrasive grit. Inside wall of peeling chamber has patented cast-in abrasive serrations which dispenses with the need for abrasive coating. Consequently there is less potato loss during both peeling and boiling and the efficiency of the serrations will last the life of the machine


view more button
Food Preparation, Peelers, Metcalfe Peelers & Chippers GU8- 28lb high pedestal single phase - sink height (5P287)
Metcalfe Peelers & Chippers GU8- 28lb high pedestal single phase - sink height (5P287)

• Powerful direct gear drive motors. The 28lb (12.6kg) peelers have 0.5hp geared units

• Single phase

• Designed to enable the user to operate, clean and maintain with the minimum of effort

• Designers and patent holders of the guarded discharge chute. Fully compliant with the requirements of the Health and Safety at Work Act, 1974. It protects the operator by allowing the door to the chamber to be opened which stops hand access through the door aperture whilst the machine is working

• Motor and gearbox units are housed inside the pedestal therefore no external projections

• The drive between the output shaft of the unit and the drive shaft of the peeler is by means of a flexible coupling which will prevent damage to the motor or gearbox if the machine is accidentally jammed or overloaded

• Top casting removable without tools so that the rotor plate can be lifted out. Turn on water and the whole machine is flushed clean . Cleaning should be carried out on a daily basis

• Rotor plate bonded with abrasive grit. Inside wall of peeling chamber has patented cast-in abrasive serrations which dispenses with the need for abrasive coating. Consequently there is less potato loss during both peeling and boiling and the efficiency of the serrations will last the life of the machine

• All peelers supplied with a wall mounted starter which incorporate the on switch, emergency stop, no-volt release and overload protection features - fitted with 13amp plug


view more button
Food Preparation, Peelers, Metcalfe Peelers & Chippers GU8- 28lb low pedestal 3 phase  (5P286)
Metcalfe Peelers & Chippers GU8- 28lb low pedestal 3 phase (5P286)

• Powerful direct gear drive motors. The 28lb (12.6kg) peelers have 0.5hp geared units

• Three phase

• Designed to enable the user to operate, clean and maintain with the minimum of effort

• Designers and patent holders of the guarded discharge chute. Fully compliant with the requirements of the Health and Safety at Work Act, 1974. It protects the operator by allowing the door to the chamber to be opened which stops hand access through the door aperture whilst the machine is working

• Motor and gearbox units are housed inside the pedestal therefore no external projections

• The drive between the output shaft of the unit and the drive shaft of the peeler is by means of a flexible coupling which will prevent damage to the motor or gearbox if the machine is accidentally jammed or overloaded

• Top casting removable without tools so that the rotor plate can be lifted out. Turn on water and the whole machine is flushed clean . Cleaning should be carried out on a daily basis

• Rotor plate bonded with abrasive grit. Inside wall of peeling chamber has patented cast-in abrasive serrations which dispenses with the need for abrasive coating. Consequently there is less potato loss during both peeling and boiling and the efficiency of the serrations will last the life of the machine


view more button
Food Preparation, Peelers, Metcalfe Peelers & Chippers GU8- 28lb low pedestal single phase (5P285)
Metcalfe Peelers & Chippers GU8- 28lb low pedestal single phase (5P285)

• Powerful direct gear drive motors. The 28lb (12.6kg) peelers have 0.5hp geared units

• Single phase

• Designed to enable the user to operate, clean and maintain with the minimum of effort

• Designers and patent holders of the guarded discharge chute. Fully compliant with the requirements of the Health and Safety at Work Act, 1974. It protects the operator by allowing the door to the chamber to be opened which stops hand access through the door aperture whilst the machine is working

• Motor and gearbox units are housed inside the pedestal therefore no external projections

• The drive between the output shaft of the unit and the drive shaft of the peeler is by means of a flexible coupling which will prevent damage to the motor or gearbox if the machine is accidentally jammed or overloaded

• Top casting removable without tools so that the rotor plate can be lifted out. Turn on water and the whole machine is flushed clean . Cleaning should be carried out on a daily basis

• Rotor plate bonded with abrasive grit. Inside wall of peeling chamber has patented cast-in abrasive serrations which dispenses with the need for abrasive coating. Consequently there is less potato loss during both peeling and boiling and the efficiency of the serrations will last the life of the machine


view more button
Food Preparation, Peelers, Metcalfe Peelers & Chippers NA15 Bench mounted peeler (5P153)
Metcalfe Peelers & Chippers NA15 Bench mounted peeler (5P153)

A true kitchen time saver, the British made Metcalfe NA15 6.8kg potato peeler in Aluminium colour is the perfect automatic potato rumbler for busy professional kitchens. Able to peel up to 54kg of potatoes every hour, the Metcalfe NA15 is simple and mess-free to use. Featuring an innovative V-belt and patented cast-in abrasive serrations, this high quality potato rumbler is designed to operate quietly and reduce potato wastage - saving money. Perfect for standard or new potato peeling.


view more button